Cyclone Box Installer v1.10 FBUS2USB, TurboCache, Infineon XGold Imei, Loaders & More (2010-12-07)

CYCLONE TEAM - Proudly Presents

• Cyclone Box Installer v1.10

What's new?

• Infineon XGold IMEI Backup/Restore added (First in the world)
• New BB5 FBUS/USB Loaders v10.34.1 introduced
• BB5 USB Flashing module rewritten, supports new Flashing Type: FUR USB
• using FBUS loaders on USB. Is possible now to do also RPL write, Cert's read/write/erase, using just USB cable. Full FBUS protocol emulation over USB supported!
• FBUS2USB RAPU Support
• FBUS2USB RAP4 Support
• FBUS2USB Broadcomm Support
• Broadcomm platform flashing added (Nokia X2,....)
• 6700,E52 and other RAPunistore Booting fixed (Wrong First Char Received)
• SL3 Simlock RPL Write Introduced
•  DCT4/BB5 Flash TurboCache added, increasing flashing speed a bit
• The Profile Bits is now analyzed before SL3 Unlock (it will not submit job if phone have blocked NCK unlocking
• i.e. Telcel Mexico units)
• New NCK unlocking method for SL2 phones introduced (with latest MCU SW versions)
• Added Autologging (operation logs are stored in StoredFiles)
• Added USB Full RPL Backup (NPC,CCC,HWC,Simlock,WMDRM,etc)
• Added StatusBar in Nokia Tool, displaying current Task/Mobile attached
• DCC Camera Repair added for module NI00BC0000030102F201
• DCC Camera Repair added for module ISL3TI0200000C000002
• DCC Camera Repair added for module IS00TI0200000C208A03
• DCC Camera Repair added for module IS00TI02000001022B04
• DCC Camera Repair added for module 86000300010401022B04
• DCC Camera Repair added for module 8600030001040C208A03
• DCC Camera Repair added for module 86L10300010406260004
• DCC Camera Repair added for module 86L10300010406260000
• DCC Camera Repair added for module 86L103000104094C1003
• Refactorized GUI thread problems
• Improved stability of Blackberry calculator
• Improved flashing speed with Skins Enabled
• Added detailed Action Statusbar
• Added CBUS StatusBar, indicates "---->" on USB Transmit, "<----" on USB Receive, Idle and Errors
• Support area is rebuilt
• file list parsing is optimized
• "Connection Closed Gracefully" in Support Area fixed
• Connection recovery in SupportArea added
• Fixed "Floating Point Divison by zero" in Support Area
• Entered NCK codes are now backed-up too upon Simlock Backup
• New progressbar introduced in Nokia Tool gui
• Improved USB SwitchToRaw
• Improved ADL Server Pooling
• Improved USB Phone Pooling
• USB BootRom detect routine rebuilt
• Fixed "Access Violation" while application exit
• Fixed Registration Tool bug when "Submit" button is not shown after Box Prepare
• Fixed bug when software after minimizing to tray don't appears at taskbar
• Added "KB Left", "Time Left", "Current Speed" real-time information while downloading files from support
• The Germany Server is now default Support Server
• Added support for Box HW Revisions B, thus is A11F, B110, B111 and B112, and other B11x
• Old "INI" File Parser Module added (for Old DCT4 phones)
• Old "INI" File parser Module added (for Old BB5 phones)
• Added support for 6630,6680,N70 ini parser (DPConverted v1-v2 VPL files)
• The product name is now resolved at Product List (i.e. RM-1 (6630))
• Auto-select flashfiles added (selects product and variants on Read Phone)
• The new method of BB5 NCK Calculation is now the default Unlock Method for BB5 mobiles. For SL3 use SL3 Online Code Calculation.
• "Abort" button added, this terminating all threads (during flash, erase, unlock, whatever)
• Skin Manager updated to v7.02, much stable and faster
• Fixed box hangup problem when PC goes to sleep mode
• - During SL3 Check/Submit job, phone is readen first, then server transaction starts (to not overload server resources)
• Failed to Process Initial Challenge (2) during Bootloader Upgrade fixed
• During SL3 Submit Job software now try first to read PM 120 and detect if phone is SL3
• Small changes regarding SL3 Submit Job
• should work bit smoother right now with bad cables
• Updated message about SL3 Credit consumption
• Added bigger delay between entering NCK codes (bruteforce protection)
• Fixed "Canvas does not allow drawing" while SL3 Manual Mode
• Cyclone Secure Bootloader v2.13 Released
• Cyclone Main Firmware v01.49 Released
• Cyclone Calculator v1.00 added into installer
• Cyclone USB Drivers Updated to 1.0.0.5
• Connectivity Cable drivers updated to 7.1.34.0
• Minor changes and bugfixes

How to update? 

1. Uninstall old installer
2. Download new installer
3. Install it
4. Upgrade box firmware
5. Enjoy

Where to download?

• Click Here to Download