0 Trik Reset HP Chinese

GENERAL CHINESE MODELS CODE :
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send

Other Secret Codes ,Chinese Models...
--------------------------------------------------------------------------------
Service codes Samsung :
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
Service codes BenQ:
Article Source: Forum Komunitas Teknisi Ponsel Indonesia Kode reset hp cina
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes VK-Mobile 3xx, 5xx :
Article Source: Forum Komunitas Teknisi Ponsel Indonesia Kode reset hp cina
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG :
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka :
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar :
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motorola :
Motofone F3 software version: **9999* Send
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice :
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200

Selengkapnya tentang Trik Reset HP Chinese

0 MobileEx Setup V 3.4 rev 1.6(20101120)

V3.4 revision 1.6, Public-Release

- NK
Added, Certificate Reset function
Allows user reset NPC/CCC/HWC/VARIANT.
Panel located to [IMEI & Security->IMEI rebuild]
Added, ALS calibration function.
Page located to [Phone Test->ALS Cal]
Added, Provider info on Multilocked phones
Added, Phone timers edit.
Allows users to edit life timers, read calls received, calls dialed, last call and calls all
Updated providers.ini based on Annex to ITU OB 958-E (No. 958 – 15.VI.2010).
Make SIMLOCK RPL selected by default
Repair SD button moved to PM Tab
Reset NPC button removed as no longer needed(replaced by Certificate Reset)
- ALC
Larger font for PID list as requested by user.
Added alc.mx (Alcatel module) to the main setup.

 

Selengkapnya tentang MobileEx Setup V 3.4 rev 1.6(20101120)

0 HWK Suite Minor V.02.10.003.exe

The Official release is ready in our download area http://sarunasoftware.com.

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_SAMs v2.0.10.3
--------------------
V 2.1.0.3
------
TRIDENT
M628N added (DUNL,IM,FL)
SWIFT
A256,J218,S3600i,S3601C added (UNL,IM,FL)
SWIFT-3G
B2703 added (CUNL,FL,SECT,BT)
QUALCOMM
A747,C5510,C5510U,T929 UNLOCK and UNFREEZE added.
Improved Decryption algo, more models UNLOCK and
UNFREEZE supported by Default.
BROADCOM
S5230K,S5230R added (CUNL,FL,BRP)
B5310,S5620,S5628,S7070C added (FL)
Use Samsung Kies drivers for these models (B5310,S562x)
Fixed 'Cannot Find NandInfo !' on some models.
COMMON
Log to file fixed for Trident models.
Introduced New Extremely Fast Key Calculation Algorithm (DHLT)
Need few hours for Tables generation at First Software startup.
But after, Key calculation for Qualcomm, Broadcom and Trident
platforms will take few seconds. DHLT (c)SarasSoft.

Users who not want to wait few hours for DHLT table generation can download the files from our Official Rapidshare mirror. The files should be placed into x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT

Many thanks to all those who have supported us!!!

HWK Suite Minor V 02.10.003

Selengkapnya tentang HWK Suite Minor V.02.10.003.exe

0 HWK Suite Minor V.02.10.002.exe

The Official release is ready in our download area http://sarunasoftware.com.

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

This release contains a new update client which you ONLY need to run if you have the message "None Authorised Copy of Software detected, Please Use Original Install Package:0" That means users without the message do not need to run this new update client, but if you do no harm will be done, you just lose 1 log.

UFS_SAMs v2.0.10.2
--------------------
SWIFT-AEROFONE
T239 added (CUNL,FL)
BROADCOM
Fixed UnFreeze Key Display.

Many thanks to all those who have supported us!!!

 

HWK Suite Minor V 02.10.002

Selengkapnya tentang HWK Suite Minor V.02.10.002.exe

0 HWK Suite Minor V.02.10.001.exe

The Official release is ready in our download area http://sarunasoftware.com.

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_DCTxBB5 v2.0.10.1
-----------------------
1. RM-392,RM-393 (2680s-2,2680s-2b) v6.17 unlock bug fixed.
2. Box Init bug after BB5 flash fixed.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

HWK Suite Minor V 02.10.001

Selengkapnya tentang HWK Suite Minor V.02.10.001.exe

0 HWK Setup V 02.10.000

The Official release is ready in our download area http://sarunasoftware.com.

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.
You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.
You MUST be running HWK software 2.0.10.0 to access support.

UFS_DCTxBB5 v2.0.10.0
-----------------------
1. New BB5 products:
RM-381,RM-455,RM-468,RM-492,RM-529,RM-530,RM-570,RM-573,RM578,RM-579,RM-584,RM-599,RM-600,RM-635
(6750-1,6350-1b,5730s-2,6790s-1b,E72-2,E72-1,3208c,6760s-1,2730c-1,2730c-1b,E72-5,6790s-1c,E63-5,2690)
2. New DCT4+ products: RM-590,RM-591 (2220s-2,2220s-2b)
3. More DCT4+ added for unlock (ASIC 3168) see corresponding list.
4. McuSw tag fixed in vpl parser.
5. Fixed time-out bug for some RAPU models.
6. [Det.Log] CheckBox now active, can auto create LOG file.
7. [Info] Shows Camera DCC settings and Status (for both Cameras)
8. [PM Edit] Revised: Read/Write DCC, Simlock Data, Parallel Model.
9. Increased PM read default margins, to have DCC in read PM for DCT4+
10.[Check Ask/Rpl] to Check Ask/Rpl files contents (Asic 2,5,6,7)
11.Fixed [Format] bug for new BB5 Symbian products.
12.ENO File flashing support (E63,E66,..,N97,..)
13.[Locks] for BB5 remade, now calculate codes for SLPA and SL20
14.[Check] Shows PASUBTOC SL related contents.

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG GSM V 2.0.10.0
------------------
1. MTK GB160,GB165,GB170,GB175,GB190,GB195,KG198 added.
2. Infineon GB101,GB109,GB110,GB125,GB130,KE858,KP108 added.
3. Infineon New Flash Chip SV7E3204UTA support.
4. ADI KG129,KG248,KG298 added.
5. " Cannot open file " Bug Fixed.

SAMs V 2.0.10.0
----------------
TRIDENT
C158,C158B,C188L,C240L,C258,C260B,C260L,C260M,C300 B,E576,E758,
X138,X180,X468P,X478,X568 added (DUNL,IM,FL)
USB flashing introduced for HPE models (U600,.. Approx. 2x faster)
TRIDENT VISION
B3210,B3310,B3313,C3010S,C3050C,C3053,C3060,C3110H ,M620N,
S3030C,S3500C,S3500H,S3500i,S3501C,S5150,S5150C added (CUNL,IM,FL)
MSL3 bypass introduced (B3210,B3310,B3313,C3060,C3060R,...)
USB UI functions introduced, allows to unlock USB only phones.
USB flashing introduced (Approx. 5x faster)
(Cannot use USB flashing of dead phones which have UL erased or damaged.
RJ45 flashing can be used to recover from erased UL situation)
SWIFT
A177,A226,A227,A237,A257,B3410,B5702,B5712C,B5722, B5722C,C3212,
C3510,C3518,C6112,C6112C,D980F,E200E,E208B,E250L,E 848i,F118,
F278,J150B,M2710,M2710C,M2710L,M3510C,S3100,S3110, S3110C,
S3600C,S3600H,S5200C,T219,T329,T729 added(UNL,IM,FL)
Added ENG flashing for DUOS FOTA models (D988,B5712C,..)
Auth. Boot and Firmware Sign. for Secure models (B5722,C3510,C6112,S3100)
B5702,D988,F265L,S5050 (SECT) bug fixed.
CSC Area format added.
SWIFT-AEROFONE
A137,CC01i,E1070C,E1100C,E1101C,E1107,E1113C,E1120 C,E1210,
E1310C,E1310E,E1360,E1360C,E1360S,E2100C,E2210C,E2 210H added (DUNL,IM,FL)
E1080,E1080C,E1080T,E1085,E1085L,E1085T,E1088C,E11 00H,E1150,
E1150C,E1160,E2120,E2120B,E2120C,E2130 added (CUNL,FL)
SWIFT-3G
C5110,C5130,C5130S,C5130U,J800R added (CUNL,FL,SECT,BT)
P270 (CUNL,SECT) bug fixed.
E2P Write is supported only for C5130,C5130S and C5130U.
QUALCOMM
A551,A561,A637,A746,A747,A766,A767,A811,A821,A827, A836,A837,
A867,C5220,C5510H,C5510U,G508,G508E,M7600B,M7600H, S5350,
S5600B,S5600L,S5608U,S5510,S7120U,S7350C,S7350E,S7 350F,
S7350H,S7350i,S7520U,S8300H,T469,T659,T749,T919,T9 29,U808 added.
Fixed flashing of non page size aligned files (rc1,rc2,ffs)
Added flashing support for QSC62xx models.
UNLOCK and UNFREEZE added for these models:
A551,A637,A767,A827,A837,C5220,F400,S5510,S7350,S7 350C,
S7350F,S7350i,T639,Z170,Z240E,Z360,Z720,ZV40
BROADCOM
QC Legacy BroadCom models introduced:
i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G,
S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C,
S7070 (CUNL,FL) To read codes use:
[Mobile Info] button using USB Cable (Phone Switched-ON)
and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)
QC Legacy BroadCom models Full Flashing (with BOOT Change)
[BOOT Repair] for QC Legacy BroadCom models added.
Boot Repair and Codes Read is possible only for phones with
NM_20 pin USB/RJ45 connector !
COMMON
Log to file added.
CLONE error message fixed.

 

HWK Support Suite Setup V 02.10.000

HWK Suite Setup V 02.10.000

Selengkapnya tentang HWK Setup V 02.10.000

0 Frimware Nokia 2710c RM-586 V 09.67 BI Only

Selengkapnya tentang Frimware Nokia 2710c RM-586 V 09.67 BI Only

0 Frimware Nokia 5130 RM-495 V 7.97 BI Only

 

Selengkapnya tentang Frimware Nokia 5130 RM-495 V 7.97 BI Only

0 Nokia E55 Solution

Selengkapnya tentang Nokia E55 Solution

0 Nokia N900 Solution

Selengkapnya tentang Nokia N900 Solution